The onset of winter means that e-foil sessions will be less frequent, but they will soon return. So make sure your efoil is ready for the sunny days ahead!

Revision and Upgrade of your efoil PWR-Foil

Take advantage of winter to give your machine a service or the latest upgrade and make sure your equipment is ready to take on all the challenges of the coming season. If you acquired your equipment before July 2023, contact us now to schedule your annual maintenance services between December and February to ensure optimum performance for your next adventures. Find out all the details about servicing or upgrades by clicking here!

Winterising your PWR-Foil e-foil

We're not afraid of the cold, and we'll keep on going even when the snow is falling ❄️ If you're leaving your e-foil to rest over the winter and want to ensure optimum preservation, here's our advice:

Preparation before storage: Rinse, dismantle, clean and grease the components. Prevent the motor from seizing by soaking it in a tub of fresh water for 1 day.

Rinse the board and allow it to air dry completely before storage.

Cleaning components: Do not use alcohol-based products or any other flammable solvent to clean the various components of the PWR-Foil.

Storage of components : Store the components of the e-foil system, the PWR-Foil remote control and the PWR-Foil battery in the original foam packaging, in a safe, dry place, out of direct sunlight, at a temperature between 10° and 28°. (see Safety and Responsibilities p.7 of the service manual).

Wintering the battery: To preserve the battery's longevity, it is ideal to store it at a voltage of around 45V, i.e. 30% charge. Use a voltmeter or the Smart BMS application (if equipped with Bluetooth) to check the voltage (see Safety and Responsibilities p.7).

This is potentially dangerous equipment. It should be stored in a dry place, out of direct sunlight, away from sources of heat and flammable products, at an ideal temperature of 20/28°C.